When a Brisbane project needs hot water that performs reliably without the space demands and standby energy loss of storage, the real challenge is making sure the system suits the building, the electrical capacity, and the way the site will actually operate.
ELWA manufactures high-efficiency instantaneous hot water systems for commercial and industrial applications, including new-build apartment projects. We help plumbers, electricians, hydraulic engineers, consultants, builders, project managers, and facilities managers align product selection with outlet demand, available power, required temperature, and site conditions.
ELWA is Australian-owned, with its central office in Adelaide location, a supporting team in every state, and Queensland support through its Carindale contact point. We draw on more than 35 years of Hot Run water heating experience to help Brisbane project teams access manufacturer guidance grounded in practical product selection, not guesswork.
For commercial and industrial projects, ELWA can help bring greater clarity around:
That gives project teams clearer information before procurement, installation, and commissioning.
The ELWA Hot Water system range of electric instantaneous water heating systems is designed for commercial applications where compact design, on-demand performance, and flexible electrical options all matter. Key benefits include:
Every site has its own constraints. Some need to work within limited electrical capacity. Some need a higher delivery temperature for kitchens, cleaners’ sinks, or back-of-house areas. Others need temperature-limited settings for healthcare, education, childcare, aged care, or accessible environments.
That is why better outcomes usually start with a clearer understanding of the application before the system is selected.
Review the outlet types, number of outlets, expected usage pattern, and target delivery temperature.
Check whether the site has single-, two- or three-phase power available, together with the usable load.
Consider simultaneous use, peak draw-off, inlet water temperature, and the flow needed at each outlet.
Where temperature-limited delivery is required, the correct setting should be confirmed against the application and site requirements.
Drawings, floor plans, schedules, and service details help in product selection and point the project towards the appropriate plumbing or electrical distributor.
Working through these details early can help reduce later changes, commissioning issues, and avoidable delays.
The most useful starting point is the outlet type, number of outlets, expected usage pattern, required delivery temperature, and available electrical supply. Floor plans, fixture schedules, and service details can also help ELWA guide the selection more accurately and point the project towards the right plumbing or electrical distributor.
In many applications, yes. Positioning hot water closer to the point of use can help reduce long pipe runs, improve response times, and limit unnecessary water and heat loss. The suitability of that approach depends on the building layout, the number of outlets, and the way hot water is used across the site.
The required delivery temperature needs to be considered alongside inlet water conditions, expected flow, and the electrical capacity available on site. A system should not be selected on temperature alone. Reviewing all of these factors together helps ensure the system can deliver the required performance under real operating conditions.
ELWA is a manufacturer. Hot water system are supplied through plumbing and electrical distributors, with ELWA providing product guidance and technical support to help align the selection with the project requirements.
FOR ALL ENQUIRIES PLEASE GET IN TOUCH WITH US
Specialising in the design, manufacturing and installation of innovative LED lighting and electric water heating solutions.
Call: +61 8 8377 6666
Monday – Friday: 8am–5pm (AEST)